Replacement Fan
how much will a replacement Wii fan cost?
I have a Wii, and one of my friends dropped it, and now the fan stopped working, is this a problem i can fix on my own or will i have to send it in for repair, and how much will it cost?
They sell external fans for the wii...you could try that if it starts to overheat.
http://www.superufo.com/product_html/Nintendo_Wii_Wii_Cooling_Fan.html
 |
 Foundry Brocade FAN B3000 19010 100A Replacement FAN for 3 slot JetCore Chassis  US $937.46
|
 Brocade 3900 FC Switch Power Supply and Replacement Fan US $500.00
|
 Cisco 8540 Replacement Fan Assembly C8540 FANTRAY US $329.95
|
 Adtran 23in replacement fan 1186008L1 US $328.80
|
 Cisco WS C6509 E FAN Replacement fan for 6509 E US $275.00
|
 NEW Brocade 3900 FC Switch Replacement Fan XBR 3900 003 US $200.00
|
 Cisco 3845 Replacement Fan Faceplate CISCO3845FANASSY US $199.95
|
 Cisco PIX 535 Firewall Replacement Fan Kit US $185.00
|
 Dell PowerConnect 6024 R1799 Replacement Fan Kit all 6 Fans US $162.00
|
 Adtran Assy fanm replacement fan 1184508L1 US $157.20
|
 Cisco 7140 Router Replacement Fan Kit CISCO7140 US $147.00
|
 Cisco AS5300 Router Replacement Fan Kit 5300 US $147.00
|
 Cisco PIX 525 Firewall Replacement Fan Kit US $147.00
|
 Cisco AS5400 Router Replacement Fan Kit AS5400XM US $147.00
|
 Cisco Catalyst WS C2948G GE TX Replacement Fan Kit 2948 US $147.00
|
 Cisco 7301 Replacement Fan Kit 5 New Fans US $135.00
|
 Dell PowerConnect 3524P G636F Replacement Fan Kit US $135.00
|
 Dell PowerConnect 3424P UJ599 Replacement Fan Kit US $135.00
|
 Dell PowerConnect 3548P M727K Replacement Fan Kit US $135.00
|
 Cisco Catalyst WS C2970G 24TS E Replacement Fan Kit US $134.00
|
 Cisco Catalyst WS C3550 12G Replacement Fan Kit 3550 US $134.00
|
 Cisco Catalyst WS C3550 12T Replacement Fan Kit 3550 US $134.00
|
 Cisco Catalyst WS C3750G 24TS E Replacement Fan Kit US $134.00
|
 Cisco Catalyst WS C3750G 24TS S Replacement Fan Kit US $134.00
|
 CISCO N5K C5020 FAN NEXUS REPLACEMENT SPARE FAN US $120.00
|
 Dell PowerConnect 6248 XT800 Replacement Fan Kit US $108.00
|
Engineering of high temperature fans and blowers for operating up to 2,200 F
Northen Industrial Co. offers new temperature blowers and fans for various industrial applications to 2200 F. This was achived by using extremely high strength stainless steel alloys for the fans impellers, that allow for higher safe speeds at elevated temperatures.
The Northern Industrial high temperature oven fans line now include:
- Operating up to 2200 F, centrifugal, axial and plug fan types;
- Pre-engineered and custom made fans for all types of applications with vaiety of impeller types and accessories;
- Canada Blower engineers provide a professional advice and recommend a right fan for every application & oven / plenum design;
- The fan offering provides competitive replacement fans to Garden City, Lau, IGE, Alloy Fabricating fan models; repairs, re-build & balancing;
- Unique high temperature water-cooled motors for operation up to 2300 F.
Fans with ambient air cooling systems handling hot airstreams must have sufficient airflow and be kept in operation until airstream temperatures cool below 120 F to prevent damage to the fan unit. The Tubeaxial fan ambient air cooling system is only effective while fan is operating.
There are two major types of high temperature fans - centrifugal and axial:
Centrifugal Wheels:
* Multiblade forward curve wheel. This type of wheel is usually specified where there is a necessity for large volumes of flow against low to medium static pressure requirements. The forward curve blade is that it delivers the same volume of air as either the backward or radial blade wheel, at a lower fan speed, which is important due to wheel stresses at elevated temperatures. This fan is the most common type used in all types of heat treatment operations except where a buildup of material on the blades could occur, as wheel unbalance would result.
* Radial Blade, paddle wheel type fans. This type of wheel is usually specified where there is a necessity for medium volumes of flow against medium to large static pressures. The paddle wheel is considered a self cleaning type of wheel. It could be used where there are various materials or dust in the air stream. Due to its structurally strong design, it is used in many heat treatment applications at very high temperatures where maximum fan longevity is desired.
Axial Blade Wheels:
* The axial blade wheel is usually specified where there is a need for very large volumes of flows against low static pressure. Axial wheel like the multi-blade forward curve type wheel could cause an axial fan to deliver different air volumes at the same static pressure, if the total pressure requirement of the fan system was underestimated. This type of fan is ideally suited where a large volume of flow is required with a minimum of duct work and is used extensively for small and large furnaces, such as aluminum annealing.
Fans handling hot airstreams must have sufficient airflow and be kept in operation until airstream temperatures cool below 120 F to prevent damage to the fan unit. The Tubeaxial fan ambient air cooling system is only effective while fan is operating.
For additional information please refer to http://northernindustrialsupplycompany.com/index.html.
Oleg Cthetchel
Canadian Process Design Engineer
Northen Industrial Co.
http://northernindustrialsupplycompany.com/products/industrialfan_blowers.html
http://northernindustrialsupplycompany.com/products/industrialfan_blowers.html
About the Author
Oleg Cthetchel
Canadian Process Design Engineer
Northen Industrial Co.
http://northernindustrialsupplycompany.com/products/industrialfan_blowers.html
http://northernindustrialsupplycompany.com/products/industrialfan_blowers.html