Female Connector
Phuket road project approved
PHUKET: Following a successful public hearing process, Phuket City Municipality will move forward with a project to build a new road connecting Chao Fa East Road to Saphan Hin.
 |
 LOT OF 520 SMA FEMALE FLANGE 4 HOLE RF CONNECTOR NEW  US $1,300.00
|
 RFS 1 5 8 DIN Female Connector | 716F LCF158 D01 | Listing is for 10 Units US $700.00
|
 NEW Andrew AL5DF PSA DIN Female Connector Qty 25 US $500.00
|
 200RP SMA Male Connector to Female Router AntennaC6 US $490.00
|
 500RP SMA Male Connector for LMR 195 RG 58 FemaleC20 US $328.00
|
 200 UHF PL259 Female Crimp Connector for RG58 LMR195 HF US $318.00
|
 NEW LOT of 6210 Kycon Female Cat 5 Ethernet RJ45 Connectors GD N 64 US $299.99
|
 200 Female Jack SO239 Panel Chassis Mount Connector HF US $288.00
|
 500Female USB A to Male Ethernet RJ45 CAT5 Connector US $278.00
|
 100RP SMA Female to MMCXMale Right Angle ConnectorBN8 US $269.00
|
 100RP SMA Female to TNC Wireless Connector AdapterSTF US $236.00
|
 50040x2 Female PIN Header PCB Data IDE Connector DIL US $229.00
|
 BLACK BOX MC622A STATPLEX MALE FEMALE CONNECTORS 153039 US $229.00
|
 24 GHz 30 dBi Grid Antenna N Female Connector US $225.00
|
 Andrew L12PDF 7 16 DIN Female Connector Qty Avail US $200.00
|
 100TNC Male to BNC Female RF Adapter Coax ConnectorTF US $199.80
|
 100 TNC Male to BNC Female RF Adapter Coax ConnectorTF US $199.00
|
 100T Connector Adapter SMA Female to 2 SMA MaleC11 US $199.00
|
 100T Connector Adapter SMA Male to Dual SMA Female C10 US $199.00
|
 PACK100RF connector adapter SMA male to F femaleC21 US $188.00
|
 100pcs UHF PL259 SO239 Female Crimp Video Adapter Connector for RG58 LMR195 HF US $188.00
|
 PKG200 37 Pin D Sub Connector Plug Male Female35 US $178.00
|
 PKG200 37 Pin D Sub Connector Plug Male Female35 US $178.00
|
 L12PDF 7 16 DIN Female for 2 ¼” foam Heliax Connector US $175.00
|
 100N female Crimp Connector LMR 195 LMR195 RG58C40 US $173.00
|
 100 TNC Famale To SMA Female Coax Adapter ConnectorTSM US $155.00
|
MT-RJ (Mechanical Transfer Registered Jack) As A Small Connector Option
The MT-RJ (Mechanical Transfer Registered Jack) is normally used in communication systems within buildings. It is a small form-factor connector designed as a jack and looks similar to an RJ-45 telephone connector. As such, it is often confused with an actual telephone connector due to this similar look. The latch adapter can be attached to the MT-RJ but is not mandatory for use and can be left out as the MT-RJ easily attaches and detaches from the components' connecting panel. Being smaller in size as compared to other types of connectors, it uses up less space and affords more port density.
There are two variations of the MT-RJ. The pinned version, also known as the male connector, has two small guide pins at its end. Normally made of stainless steel, these pins are parallel to the two optic fibers protected within the ferrule inside the cable. The no-pinned version which has two holes is known as the female connector. As nature intended, the mating of the male and female ends then connects the communication loop between cable, panel and patch cord.
Since the MT-RJ (Mechanical Transfer Registered Jack) has two pins, it supports multimode connection. Although cables are usually terminated using the pre-polished/splice method at factory, multimode connectors can be installed in the field after the cables have been pulled and properly laid out. The reason for later termination is to avoid errors due to incorrect cable lengths. Pre-installed terminators also need to be carefully handled during the cable installation exercise. Hence, cable manufacturers normally provide protective sleeves to cover the connectors from damage. Various types of terminations can be done on multimode fibers, each having its own set of advantages and disadvantages. Whether to terminate on the field using whichever method, it is best to follow the manufacturer's recommendations to ensure quality results.
Cable manufacturers produce these multimode connectors in a variety of colors. Some include an extra plug for testing purposes. By requiring no epoxy and polish, it allows easier termination and faster job completion. Since there are numerous types of connectors as well as components to be connected together, manufacturers also produce cables with different connector heads to allow inter-connection. There are cables which sport MT-RJ connectors at one end and a variation of LC, SC and ST connectors on the opposite end. This then enables a single cable to be used instead of having to purchase two cables and an adapter in between them. Being a more economical option, it also causes less clutter in the computer room. The last thing anyone wants is to wade through spaghetti of cables in the process of installations and trouble-shooting.
About the Author
Dennis enjoys writing on wide range of topics such as MT-RJ (Mechanical Transfer Registered Jack) and MT-RJ (Mechanical Transfer Registered Jack) . You may visit for more details.